Timeline for Can I efficiently monitor sound card line in with a vu meter?
Current License: CC BY-SA 3.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 19, 2016 at 13:09 | answer | added | F. Bloggs | timeline score: 0 | |
| Apr 19, 2016 at 11:07 | answer | added | user16324 | timeline score: 1 | |
| Apr 19, 2016 at 6:26 | comment | added | Transistor | You will be connecting the VU meter to a branch off the signal line. If the VU meter is too sensitive you can make it less so by using a potentiometer. If it's not sensitive enough a simple op-amp amplifier with gain adjust will boost the signal to drive the meter. Then it's just a matter of calibrating at some 0 dB reference. Note that VU meters have some simple electronics (rectifier and, I think, capacitor) and if you've just got bare meters you're going to be modifying them anyway. | |
| Apr 19, 2016 at 2:36 | answer | added | Richard Crowley | timeline score: 1 | |
| Apr 19, 2016 at 1:46 | history | edited | Paul Uszak | CC BY-SA 3.0 |
added 150 characters in body
|
| Apr 19, 2016 at 0:56 | answer | added | Mark | timeline score: 1 | |
| Apr 18, 2016 at 23:59 | history | asked | Paul Uszak | CC BY-SA 3.0 |