Timeline for How to drive power MOSFET by logic level signal without inverting phase?
Current License: CC BY-SA 3.0
2 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 15, 2016 at 22:51 | comment | added | Lukasz | I got that - basically it simply means that if there is any other voltage than 0V at the Drain then MOSFET is not on or not fully on (has some resistance). So actually it could also serve as means to measure if it is fully on - lower the voltage = lower Drain->Source resisntace right? | |
| May 15, 2016 at 22:46 | history | answered | WhatRoughBeast | CC BY-SA 3.0 |