Skip to main content

Timeline for DIY: How to get 110VDC from AC

Current License: CC BY-SA 3.0

11 events
when toggle format what by license comment
Sep 9, 2016 at 12:33 comment added D.A.S. use555 timer , invert and drive 2 transistors may lead to smaller C values or FET & cap as @jonk showed with same 1:10 boost 10VA transformer
Sep 9, 2016 at 12:27 comment added D.A.S. yes 10W will ring an old phone or two easily start with phone impedance work back to >20* Rce , where Rce= Vce(sat)/Ipk to compute using hFE=20, then R values then C for 25Hz or use555 timer
Sep 9, 2016 at 7:35 comment added user400344 And would a 12V/1A supply be sufficient?
Sep 9, 2016 at 7:29 comment added user400344 12V input - What about the properties of the transistors and other components? I never generated AC before. Got a bunch of TIP120s laying around... My resistors are all for 0.25W. Got insulated copper wire of the type used for coils as well - how many meters do I need? And coil turns + diameter?
Sep 9, 2016 at 3:54 comment added D.A.S. @user400344 This does not operate off the power grid 50/60 but inverts Dc to a 25Hz bell ring tone for old solenoid bells. so look for a .240>24 XFMR and use in reverse @ jonk Imagine that inverter would work as well if you can find the transformer,
Sep 8, 2016 at 19:07 comment added jonk @user400344: Found this link yesterday, which the above schematic reminded me about: next.gr/telephone/ringers/…
Sep 8, 2016 at 8:10 comment added user400344 Cool design - what reference formulas do you use to calculate coil turns and diameter? Note: we use 230V @ 50Hz here
Sep 8, 2016 at 4:13 history edited D.A.S. CC BY-SA 3.0
added 2 characters in body
Sep 8, 2016 at 4:04 history edited D.A.S. CC BY-SA 3.0
added 75 characters in body
Sep 8, 2016 at 3:57 history edited D.A.S. CC BY-SA 3.0
added 153 characters in body
Sep 8, 2016 at 3:52 history answered D.A.S. CC BY-SA 3.0