Timeline for Run a 120V/60Hz motor at 230V/50Hz
Current License: CC BY-SA 3.0
12 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Dec 5, 2016 at 0:20 | answer | added | Russell McMahon♦ | timeline score: 0 | |
S Dec 4, 2016 at 9:16 | history | suggested | try-catch-finally | CC BY-SA 3.0 |
Clarified title; fixed unit typos; fixed link description; reordered text; remove "thanks for replies"; left the supposely wrong "step up" as is
|
Dec 4, 2016 at 7:53 | review | Suggested edits | |||
S Dec 4, 2016 at 9:16 | |||||
Dec 4, 2016 at 4:46 | history | edited | dshaw | CC BY-SA 3.0 |
added 331 characters in body; edited title
|
Nov 21, 2016 at 3:21 | answer | added | Richard Crowley | timeline score: 3 | |
S Nov 21, 2016 at 2:44 | history | suggested | Mahendra Gunawardena | CC BY-SA 3.0 |
Remove thanks in advance
|
Nov 21, 2016 at 0:40 | review | Suggested edits | |||
S Nov 21, 2016 at 2:44 | |||||
Nov 21, 2016 at 0:33 | comment | added | user57037 | I don't even know where to begin. Can you please provide more information about the motor, and maybe a picture of it? What is the motor in? Does it have a faceplate with information on it? You say it "runs at 30 Hz" but that seems odd since the US is a 60 Hz country. In general, if a motor is rated for 60Hz input and is not listed for 50 Hz operation, there is a chance it could overheat at 50 Hz, unless the voltage is reduced correspondingly. But it depends on the motor type. | |
Nov 20, 2016 at 20:38 | comment | added | Sam | The US power grid is 60Hz, the difference between 50 and 60Hz is not usually a big issue for most motors and transformers (with the exception of mains clocks which would run 1.2 times slower). But as John mentioned you need a step down transformer because your "stepping" from a higher mains voltage down to a lower voltage for the motor, 99% of step-up/step-down supplies have no effect on frequency (because it would cost 10 times as much as it would need way more than just a simple transformer) | |
Nov 20, 2016 at 19:50 | review | First posts | |||
Nov 21, 2016 at 0:40 | |||||
Nov 20, 2016 at 19:49 | comment | added | John D | You need a step-down transformer to run the motor in Ireland, no? If it's synchronous or an induction machine it will run at a lower speed due to the 50Hz in Ireland vs. 60Hz in the US. | |
Nov 20, 2016 at 19:47 | history | asked | dshaw | CC BY-SA 3.0 |