I got a same flip clock,which have same motor,I found from internet ,no any answer,only one is need a master clock,after this discuss,I got a idea and try use 12 DC to the motor,(Y&B) (R&W) pin is a team, And i found when it change pole between red & blue draw line it will flip.. so i use a 1 minute pluse it will work per minutes,i use a arduino and a motor driver board L298N,write program ,finally it happy work..

I got the same flip clock that I found from internet which has the same motor. I didn't find answers on how it works -- just that it needs a master clock. After this discussion I got a idea and tried applying 12 VDC to the motor with (Y&B) (R&W) wires as pairs.

And I found that when it changes pole between red & blue draw line it will flip. So I used a 1 second pulse with a 1-minute period using an Arduino and a motor driver board L298N. Here's the program:

const int motor1a = 12;
const int motor1a = 13;
void setup()
{
pinMode(motor1a,OUTPUT);
pinMode(motor2a,OUTPUT);
}
void loop()
{
digitalWrite(motor1a,LOW);
digitalWrite(motor2a,LOW);
delay(59000);
digitalWrite(motor1a,HIGH);
digitalWrite(motor2a,LOW);
delay(1000);
digitalWrite(motor1a,LOW);
digitalWrite(motor2a,LOW);
delay(59000);
digitalWrite(motor1a,LOW);
digitalWrite(motor2a,HIGH);
delay(1000);
}

Finally it happily worked.