Timeline for How to "shift" a logic LOW of 2,5 V to GND?
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jan 25, 2017 at 15:00 | comment | added | empewoow | As this solution was the easiest and required the least parts, I simulated this one and tried it out in a prototype. Turns out it works flawlessly for my application. When checking the signal on a scope the performance turns out not perfect (both edges have some lag and are less sharp-edged than original signal) but in practice there is no negative effect on the experience of the LED strip light. Many thanks for this simple circuit. | |
| S Jan 24, 2017 at 6:56 | history | edited | Whit3rd | CC BY-SA 3.0 |
notice about the slow turn-off time, dependent on unknown 'Device' and R3
|
| S Jan 24, 2017 at 6:56 | history | suggested | user136077 | CC BY-SA 3.0 |
notice about the slow turn-off time
|
| Jan 24, 2017 at 5:50 | review | Suggested edits | |||
| S Jan 24, 2017 at 6:56 | |||||
| Jan 24, 2017 at 1:55 | history | answered | Whit3rd | CC BY-SA 3.0 |