Timeline for Switch between 2 power sources
Current License: CC BY-SA 3.0
6 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Feb 18, 2017 at 3:21 | comment | added | Vishal Shinde | @claudio avi chami you can also connect that negetive supply directly I added them just for extra protection | |
Feb 18, 2017 at 3:14 | comment | added | Vishal Shinde | You can use either simple diode or schottky diode | |
Feb 17, 2017 at 22:14 | comment | added | Peterrrrrrr | thanks, very helpful diagram. what type of diode? | |
Feb 17, 2017 at 20:41 | comment | added | Claudio Avi Chami | @VishayShinde The additional diodes at the negatives are not needed. It is not only not needed but also it is not good since the losses are now twice what they would be if you connected the negative side together and used only diodes for the positive. | |
Feb 17, 2017 at 18:58 | review | First posts | |||
Feb 17, 2017 at 20:50 | |||||
Feb 17, 2017 at 18:57 | history | answered | Vishal Shinde | CC BY-SA 3.0 |