Timeline for Stainless steel soldering
Current License: CC BY-SA 3.0
13 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 8, 2023 at 19:24 | comment | added | user4574 | Any place that has pool supplies will sell it hydrochloric acid under the name "Muriatic Acid". | |
| Jul 8, 2023 at 19:17 | answer | added | user4574 | timeline score: 2 | |
| Feb 28, 2017 at 2:13 | comment | added | Optionparty | Hydrochloric acid is often found in cleaners for cloths "Steam Irons" and sometimes in cleaning supplies. A Pharmacist could suggest a source for you. | |
| Feb 27, 2017 at 19:34 | answer | added | Marcus Müller | timeline score: 1 | |
| Feb 27, 2017 at 19:33 | comment | added | Marcus Müller | @TadVaas 1. dissolve in water. 2. apply to steel. 3. Wait for copper to deposit within a couple hours. 4. wash off residue 5. solder onto copper surface | |
| Feb 27, 2017 at 18:52 | answer | added | Ecnerwal | timeline score: 1 | |
| Feb 27, 2017 at 18:24 | answer | added | Robert Endl | timeline score: 1 | |
| Feb 27, 2017 at 17:13 | comment | added | Tad Vaas | Our soldering irons go only up to 400C and this is a micro part required to be soldered under microscope, so ideally would prefer a flux. Copper sulphate is interesting idea. Any resources how to use it? | |
| Feb 27, 2017 at 17:09 | comment | added | user16324 | If all else fails, silver brazing (with borax flux) works very well on stainless steel - but at about 650C. | |
| Feb 27, 2017 at 16:56 | comment | added | Leon Heller | That must be cupric sulphate. | |
| Feb 27, 2017 at 16:49 | comment | added | Marcus Müller | My intuition is that you could apply copper vitriol (hope it's called the same in English) to a region to have a copper surface on there | |
| Feb 27, 2017 at 16:35 | review | First posts | |||
| Feb 27, 2017 at 16:42 | |||||
| Feb 27, 2017 at 16:32 | history | asked | Tad Vaas | CC BY-SA 3.0 |