Timeline for PCB Layout - Best way to hand solder under pads
Current License: CC BY-SA 3.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 28, 2017 at 23:43 | comment | added | Tiago Conceição | @peufeu I was more than clear, and i post a image at first, just because i write "component" theres no need to reply like you did, i bet you understand my intent at first place, still you come with a smart anwser. Anyway the situation is already solved. Thanks | |
| Mar 27, 2017 at 16:07 | comment | added | DerStrom8 | @peufeu All you had to do was read the original post and look at the image to see you were making a mistake. The OP was very clear about his intent. | |
| Mar 27, 2017 at 13:22 | comment | added | bobflux | No. You ask "Handsolder this component (WS2812B)". If you want to handsolder this PCB module (not component), then say so. You need a reflow oven for this, or reflow skillet. Better to provide WS2812B not mounted on PCB modules, these will be easier to solder by hand. | |
| Mar 27, 2017 at 13:14 | comment | added | Tiago Conceição | I ask if you read my whole post? Thats the RAW LED and i'm asking about a module (Look at image) | |
| Mar 27, 2017 at 13:13 | comment | added | Anonymous | Look at the picture attached to the question - this part you mention is on the board, and question is about how to solder this board which hs this part on it. | |
| Mar 27, 2017 at 12:56 | history | answered | bobflux | CC BY-SA 3.0 |