Timeline for PCB Layout - Best way to hand solder under pads
Current License: CC BY-SA 3.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 27, 2017 at 19:46 | comment | added | George Herold | @Anonymous, Yeah by hand. You do have to be sure that you get contact to the plated hole and the pad on the IC. (The last one was an LTC6090.. no FPGA's.) | |
| Mar 27, 2017 at 13:16 | comment | added | Anonymous | Did you ever do it yourself by hand? I have a design where I connect bottom chip's pad (FPGA) to the ground through wide via (metallized hole). There're a lot of space under the chip, but sometimes solder shorts other tracks/vias under the chip, or just has bad contact even if it looks soldered fine from the bottom of the board. | |
| Mar 27, 2017 at 13:06 | history | answered | George Herold | CC BY-SA 3.0 |