My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
I'm using Eagle 8.3.0 and GERBER_RS274X as device output
Edit:
This is the same file exported to a pdf, I've visualized with microsoft edge at100% zoom. When zoom in into 300% the lines are gone
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
Edit:
This is the same file exported to a pdf, I've visualized with microsoft edge at100% zoom. When zoom in into 300% the lines are gone
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
I'm using Eagle 8.3.0 and GERBER_RS274X as device output
Edit:
This is the same file exported to a pdf, I've visualized with microsoft edge at100% zoom. When zoom in into 300% the lines are gone
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
Edit:
This is the same file exported to a pdf, I've visualized with microsoft edge at100% zoom. When zoom in into 300% the lines are gone
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
Edit:
This is the same file exported to a pdf, I've visualized with microsoft edge at100% zoom. When zoom in into 300% the lines are gone
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
I'm using Gerbv 2.6 to visualize the layers and depending on the zoom of the images, the lines appear and disappear
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
I'm using Gerbv 2.6 to visualize the layers and depending on the zoom of the images, the lines appear and disappear
My manufacturer is asking me to remove those lines from the ground gerber layer
The design was made in eagle, I've been searching information about this problem and I've found nothing, I don't know if it has a specific name or it isn't a real problem
It's a problem of the gerber file?
