Timeline for Edge-mount SMA connector for ~100mil board thickness
Current License: CC BY-SA 3.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 21, 2018 at 23:22 | comment | added | The Photon | Or the one in Tony's answer labeled as "$2.50", if you cut two legs off. | |
| Mar 21, 2018 at 23:21 | comment | added | The Photon | @divB, if you can drill some more holes, my first two suggestions might still work. | |
| Mar 21, 2018 at 22:54 | comment | added | divB | The problem is the board is already manufactured. Thickness changed after placing the footprints and it got forgotten. | |
| Mar 21, 2018 at 22:35 | comment | added | D.A.S. | Good catch..... | |
| Mar 21, 2018 at 21:58 | comment | added | The Photon | @TonyStewart.EEsince'75, that $176 one is the 1.85-mm one, not SMA. | |
| Mar 21, 2018 at 21:51 | comment | added | D.A.S. | $176 at DK now digikey.ca/product-detail/en/rosenberger/08K243-40ME3/… but only $52 for these digikey.ca/product-detail/en/rosenberger/02K243-40ME3/… bargain | |
| Mar 21, 2018 at 21:22 | comment | added | The Photon | @TonyStewart.EEsince'75, The last quote I have is quite old, but they were less than that, and the quote was for 2.4-mm rather than SMA. | |
| Mar 21, 2018 at 20:29 | comment | added | D.A.S. | Yes the Screw clamp edge connectors start >$100 | |
| Mar 21, 2018 at 19:10 | history | answered | The Photon | CC BY-SA 3.0 |