Timeline for Talking to the Cortex M3 (Stellaris EKS-LM3S1968) under linux
Current License: CC BY-SA 3.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 27, 2012 at 3:22 | comment | added | Chris Stratton | You would probably change some boot mode pins and ignore the USB port, unless it goes to a USB-serial chip. If the board already has a USB debugger built in, then your problem could be needing compatible software - sometimes built in debugger protocols get reverse engineered and re-implemented in open source tools if there is enough interest in the eval board (for example, if it's sold as a loss leader to drum up interest in the chip) | |
| Jul 27, 2012 at 3:11 | comment | added | routeburn | I think I see what you're saying - so seen I'm not interested in debug capability I could just use the serial flash loader and bypass the JTAG altogether? Would it still be possible to do that using the board's USB port? | |
| Jul 27, 2012 at 2:32 | history | answered | Chris Stratton | CC BY-SA 3.0 |