Timeline for Floating net labels
Current License: CC BY-SA 4.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jun 9, 2018 at 7:19 | vote | accept | KernelPanic | ||
| Jun 9, 2018 at 7:12 | answer | added | KernelPanic | timeline score: 0 | |
| Jun 6, 2018 at 11:16 | comment | added | DerStrom8 | Check your grids. Try to re-attach the net label to the wire. If the grid is off by a hair it will still complain that the label is floating. | |
| Jun 6, 2018 at 11:13 | comment | added | DerStrom8 | "Duplicate" vote retracted - not quite the same issue | |
| Jun 6, 2018 at 11:11 | comment | added | DerStrom8 | Possible duplicate of Altium says my labels are floating | |
| Jun 6, 2018 at 10:00 | comment | added | Steve G | It's usually cause by the net label being not actually attached to the wire. Select the net label, cut it (Ctrl-X) and paste it (Ctrl-V). As you drag it to the wire you should see a red X where it will attach to the wire. Then mouse click to place it. | |
| Jun 6, 2018 at 8:02 | history | asked | KernelPanic | CC BY-SA 4.0 |