Return to Question

then it looks like the program wasn't flashed, the old program is still running. (I checked this by changing some simple parameters). When I flash the program with CLI I run this line (inside a makefile):

I used this tutorial to set everything up All my settings are shown in this album: https://i.sstatic.net/caiu3.jpg

then it looks like the program wasn't flashed, the old program is still running. (I checked this by changing some simple parameters). 

When I flash the program with CLI everything works as expected. I run this line (inside a makefile):

I used this tutorial to set everything up

All my settings are shown in this album: https://i.sstatic.net/caiu3.jpg

I used this tutorial to set everything up

I used this tutorial to set everything up All my settings are shown in this album: https://i.sstatic.net/caiu3.jpg

then nothing happens, my program doesn't output anything. When I flash the program with CLI I run this line (inside a make file):

then it looks like the program wasn't flashed, the old program is still running. (I checked this by changing some simple parameters). When I flash the program with CLI I run this line (inside a makefile):