Timeline for Can I connect Inductive Proximity sensor to two different PLC
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 9, 2018 at 14:38 | comment | added | Jack Creasey | @OrHirshfeld Yes, providing the sensor does not have to sink more than 200mA. Just disconnect the sensor and use a multimeter (on current setting) to shorth the inputs to ground to test the current. | |
| Aug 9, 2018 at 7:42 | comment | added | Or Hirshfeld | Thank you for the detailed information, Is it ok if both PLC has an internal pull-up resistor enabled? | |
| Aug 8, 2018 at 15:37 | history | answered | Jack Creasey | CC BY-SA 4.0 |