Timeline for LED Blink is not working but code can program with PIC18F4550 and MikroC
Current License: CC BY-SA 4.0
10 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Sep 23, 2018 at 8:55 | comment | added | Ind | Ok. I add following line for disable Anlog A/D , ADCON0 = 0; ADCON1 = 0x0f; but it is not working | |
| Sep 23, 2018 at 8:36 | comment | added | Leon Heller | Read the data sheet properly. As Wouter said, it is probably because of the analogue function of the port. | |
| Sep 23, 2018 at 8:26 | comment | added | Ind | Power-up function? I do not know about that. I put only TRISA.B0=0; and PORTA.B0=0; | |
| Sep 23, 2018 at 8:13 | comment | added | Wouter van Ooijen | Did you check the power-up function of A0? It has been a long time since I used PICs, but on some certain pins default to analog mode. | |
| Sep 23, 2018 at 7:41 | comment | added | Ind | I think this PIC18F4550 IC is not working. Why it can program? | |
| Sep 23, 2018 at 7:38 | comment | added | Ind | I mean the same code and change IC modal to PIC16F887 IC. I use PIC16F887 microcontroller it is working fine. Why this code not working for PIC18F4550 IC. | |
| Sep 23, 2018 at 7:36 | comment | added | Wouter van Ooijen | What is IC modal?? | |
| Sep 23, 2018 at 7:29 | comment | added | Ind | When I use PIC16F887 microcontroller it is working by changing IC modal. | |
| Sep 23, 2018 at 7:26 | comment | added | Ind | Sorry for that that is typing mistake | |
| Sep 23, 2018 at 7:22 | history | answered | Wouter van Ooijen | CC BY-SA 4.0 |