Timeline for How do I model a digital out in a circuit simulation?
Current License: CC BY-SA 4.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Dec 7, 2018 at 20:42 | comment | added | D.A.S. | Avoid the crossing lines and U got your FET DS reversed. | |
| Dec 7, 2018 at 20:04 | comment | added | Andy | Thank you for your help. I have added a circuit diagram to my question and will try that out on the bredboard. | |
| Dec 7, 2018 at 20:03 | vote | accept | Andy | ||
| Dec 7, 2018 at 19:38 | comment | added | D.A.S. | yes its ok. the current is limited by V/R but you should use the cct to activate the transistor and invert the voltage. and choose R ratio for the threshold at 0.65V = Vbe | |
| Dec 7, 2018 at 19:29 | comment | added | Andy | Thanks for your help! Assuming Vdd = 5 V does this mean that If I connect the Out of the PIR directly to ground it will source 1 mA without being destroyed? | |
| Dec 7, 2018 at 17:56 | history | edited | D.A.S. | CC BY-SA 4.0 |
added 106 characters in body
|
| Dec 7, 2018 at 17:50 | history | answered | D.A.S. | CC BY-SA 4.0 |