Skip to main content
Electrical Engineering

Return to Question

Bumped by Community user
Bumped by Community user
added 10 characters in body
Source Link
Skullnew
Skullnew
  • 1
  • 1

I just started a project to make a drone without a radio controller. I want to control 4 brushless motors connected to a flight controller KK 2.1.5 using Rpi 3 B+. Obviously, the motors are first connected to the ESCseparate ESCs and then to the flight controller. What I am not getting is how can I control each motor separately? I would appreciate any help. Thank you.

I just started a project to make a drone without a radio controller. I want to control 4 brushless motors connected to a flight controller KK 2.1.5 using Rpi 3 B+. Obviously, the motors are first connected to the ESC and then to the flight controller. What I am not getting is how can I control each motor separately? I would appreciate any help. Thank you.

I just started a project to make a drone without a radio controller. I want to control 4 brushless motors connected to a flight controller KK 2.1.5 using Rpi 3 B+. Obviously, the motors are first connected to the separate ESCs and then to the flight controller. What I am not getting is how can I control each motor separately? I would appreciate any help. Thank you.

Source Link
Skullnew
Skullnew
  • 1
  • 1

How to control 4 motors which are conected to a flight controller using Raspberry Pi?

I just started a project to make a drone without a radio controller. I want to control 4 brushless motors connected to a flight controller KK 2.1.5 using Rpi 3 B+. Obviously, the motors are first connected to the ESC and then to the flight controller. What I am not getting is how can I control each motor separately? I would appreciate any help. Thank you.