Skip to main content
Electrical Engineering

Return to Question

Copy edited (ref. <http://en.wikipedia.org/wiki/MOSFET>). In English, the subjective form of the singular first-person pronoun, "I", is capitalized. Used a substitute for the Indian English "doubts" so an international audience can understand it. Removed meta information (this belongs in comments).
Source Link
edit approved Jul 18, 2019 at 21:50
Peter Mortensen
edit approved Jul 18, 2019 at 21:50
Peter Mortensen
  • 1.7k
  • 3
  • 17
  • 23

Should I use a resistor between the gate driver and mosfetMOSFET (gate pin)?

I'm making a PWM driver for a DC motor. After solving After some doubtsquestions were answered in [this][1] postthis post, iI ended up with this schematic: [![enter image description here][2]][2]

Enter image description here

And I have some new questions:

  • Do I need a resistanceresistor between the gate and the outoutput of the gate driver (U?)?

  • Do I need a pull down-down resistor at the gate of the mosfetMOSFET?

MC34152 gate driver datasheet

Thanks for your time! :) [1]: Problems with dc motor driver design: Mosfet fail [2]: https://i.sstatic.net/8jPoP.png

Should I use a resistor between gate driver and mosfet (gate pin)

I'm making a PWM driver for a DC motor. After solving some doubts in [this][1] post, i ended with this schematic: [![enter image description here][2]][2]

And I have some new questions:

  • Do I need a resistance between the gate and the out of the gate driver (U?)?

  • Do I need a pull down resistor at the gate of the mosfet?

MC34152 gate driver datasheet

Thanks for your time! :) [1]: Problems with dc motor driver design: Mosfet fail [2]: https://i.sstatic.net/8jPoP.png

Should I use a resistor between the gate driver and MOSFET (gate pin)?

I'm making a PWM driver for a DC motor. After some questions were answered in this post, I ended up with this schematic:

Enter image description here

And I have some new questions:

  • Do I need a resistor between the gate and the output of the gate driver (U?)?

  • Do I need a pull-down resistor at the gate of the MOSFET?

MC34152 gate driver datasheet

Tweeted twitter.com/StackElectronix/status/1151869358630678528
added 90 characters in body
Source Link
Russell McMahon ♦
Russell McMahon ♦
  • 152.1k
  • 18
  • 218
  • 403

I'm making a PWM driver for a DC motor. After solving some doubts in [this][1] post, i ended with this schematic: [![enter image description here][2]][2]

And I have some new questions:

  • Do I need a resistance between the gate and the out of the gate driver (U?)?

  • Do I need a pull down resistor at the gate of the mosfet?

MC34152 gate driver datasheet

Thanks for your time! :) [1]: Problems with dc motor driver design: Mosfet fail [2]: https://i.sstatic.net/8jPoP.png

I'm making a PWM driver for a DC motor. After solving some doubts in [this][1] post, i ended with this schematic: [![enter image description here][2]][2]

And I have some new questions:

  • Do I need a resistance between the gate and the out of the gate driver (U?)?

  • Do I need a pull down resistor at the gate of the mosfet?

Thanks for your time! :) [1]: Problems with dc motor driver design: Mosfet fail [2]: https://i.sstatic.net/8jPoP.png

I'm making a PWM driver for a DC motor. After solving some doubts in [this][1] post, i ended with this schematic: [![enter image description here][2]][2]

And I have some new questions:

  • Do I need a resistance between the gate and the out of the gate driver (U?)?

  • Do I need a pull down resistor at the gate of the mosfet?

MC34152 gate driver datasheet

Thanks for your time! :) [1]: Problems with dc motor driver design: Mosfet fail [2]: https://i.sstatic.net/8jPoP.png

Became Hot Network Question
Source Link
Slart42
Slart42
  • 97
  • 1
  • 8

Should I use a resistor between gate driver and mosfet (gate pin)

I'm making a PWM driver for a DC motor. After solving some doubts in [this][1] post, i ended with this schematic: [![enter image description here][2]][2]

And I have some new questions:

  • Do I need a resistance between the gate and the out of the gate driver (U?)?

  • Do I need a pull down resistor at the gate of the mosfet?

Thanks for your time! :) [1]: Problems with dc motor driver design: Mosfet fail [2]: https://i.sstatic.net/8jPoP.png