Timeline for Unusual potentiometer pin configuration
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 22, 2019 at 13:47 | comment | added | Russell McMahon♦ | You may also be able to use a pot with tags with holes that extend radially and wrap a stiff wire around the pins, solder it and then extend the wire out in a forward direction. That gives good flexibility for spacing. | |
| Aug 22, 2019 at 13:42 | comment | added | Alnitak | Hmm, I might be able to make a TT P231 series fit by bending the pins back in the opposite direction... (although those only have a 6mm shaft rather than the 6.35mm of the original) | |
| Aug 22, 2019 at 13:06 | comment | added | Alnitak | Interesting, thanks! The pin configurations don't quite match the original 24mm pot (the pins are in a straight line) but it might be possible to make them fit. | |
| Aug 22, 2019 at 11:19 | history | answered | Russell McMahon♦ | CC BY-SA 4.0 |