Timeline for Continuous wave on SX1276
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 19, 2019 at 8:05 | comment | added | Libor Tomsik | I see, the PaSelect is switching the output through pin PA_BOOST(27) on SX1276 chip. The HPD13a board expose just this pin. The RFO_LF is probably not exposed and good shielded under metal case. That's why I was not receiving anything. | |
| Nov 18, 2019 at 16:20 | comment | added | Chris Stratton | It's not that it has to be set, it's that the output appears on a different pin of the IC depending on if it is or is not set. You probably told the output to go to one pin, but looked at the other. Very weak leakage would not be surprising, but then transmitting without a load isn't a great idea either. | |
| Nov 18, 2019 at 14:41 | history | answered | Libor Tomsik | CC BY-SA 4.0 |