I am total noob but curious when it comes to electronics, sorry if its dumb or unachievable (shouldn't be).

Just bought esp32, played with it and realized i need a display, found a 7seg one with et6226m, did a lil research and used lib for tm1650, worked like a charm.

Then realized i need a better display, found 1.8" tft 160x128, checked circuit of device for any driver ic to no avail, then I thought it might have a built-in one but i have no idea which pin is what.

Lcd have no markings or numbers other than those found here here (in the lcd section)

Image reference 1

Image reference 2

Image reference 3

Please help me figure out its pinout/diagram so I can connect it to my microcontroller.

It might possibly have ili9163 driver because of the mention of 16bits on the website but i am not sure, there are no other results on the internet.

I do have a multimeter handy, have incredible soldering skills, steady hands and am confident.

I am total noob but curious when it comes to electronics, sorry if it's dumb or unachievable (shouldn't be).

Just bought ESP32, played with it and realized I need a display, found a 7-seg one with ET6226M, did a li'l research and used lib for TM1650, worked like a charm.

Then realized I need a better display, found 1.8" TFT 160x128, checked circuit of device for any driver IC to no avail, then I thought it might have a built-in one but I have no idea which pin is what.

LCD have no markings or numbers other than those found here here (in the LCD section):

Image reference 1

Image reference 2

Image reference 3

Please help me figure out its pinout/diagram so I can connect it to my microcontroller.

It might possibly have ILI9163 driver because of the mention of 16 bits on the website but I am not sure, there are no other results on the internet.

I do have a multimeter handy, have incredible soldering skills, steady hands and am confident.