Timeline for What is a good way to connect a LED to a PCB? [closed]
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 4, 2020 at 17:10 | history | closed |
Chris Stratton Simon B Voltage Spike♦ |
Needs details or clarity | |
| Jun 28, 2020 at 20:17 | history | edited | IAmJulianAcosta | CC BY-SA 4.0 |
added 9 characters in body
|
| Jun 28, 2020 at 16:37 | comment | added | jsotola |
are you certain that you understand the requirement? ... what is the exact wording of the requirement? ... there is a difference between not supposed to be soldered to it and not supposed to be soldered directly to it
|
|
| Jun 28, 2020 at 15:43 | comment | added | jcaron | I’m trying to understand what your actual goal is. You have a LED that needs to be connected to the PCB, but you don’t want to solder it directly in to the PCB? Is there a specific reason for this? Placement of the LED in an enclosure? How far away do you need the LED to be? You could have the LED on the PCB and use a light guide instead. You could have a dedicated very small PCB just for the LED, with connectors on both PCBs to wire them together. There are probably other options, but all really depends on your actual goal. Also, is this a single colour LED, or something more advanced? | |
| Jun 28, 2020 at 15:32 | answer | added | Andy aka | timeline score: 1 | |
| Jun 28, 2020 at 15:15 | review | Close votes | |||
| Jul 4, 2020 at 17:10 | |||||
| Jun 28, 2020 at 14:26 | answer | added | paki eng | timeline score: 2 | |
| Jun 28, 2020 at 14:18 | history | edited | IAmJulianAcosta | CC BY-SA 4.0 |
added 94 characters in body
|
| Jun 28, 2020 at 14:13 | history | asked | IAmJulianAcosta | CC BY-SA 4.0 |