Timeline for Mutually exclusive latching momentary pushbuttons
Current License: CC BY-SA 4.0
11 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Jul 2, 2020 at 14:34 | comment | added | Richard | Yes I don't need 'true' reset.. this is exactly what's required. | |
Jun 29, 2020 at 13:00 | comment | added | AnalogKid | Glad it works for you. NOTE: The alternate-action function above and a separate reset switch like you started with are not the same thing. The circuit above goes to a "reset" state (no outputs high) only if you hit the correct switch when one output is high. A true reset switch clears all outputs without knowing which one is high. | |
Jun 29, 2020 at 12:19 | comment | added | Richard | You've gone above and beyond. I would award you some bounty for this but I don't know how. The eventual PCB has a lot of power smoothing, and the chip will have a tantalum cap. This is great for me, it frees up a lot of space because the switches are momentary foot switches flush mounted on the PCB, and have a HUGE courtyard. Loosing a whole switch means I can comfortably fit everything on without using the reverse side of the board, which obviously saves me money too. | |
Jun 29, 2020 at 3:12 | comment | added | AnalogKid | I added an expanded circuit explanation. | |
Jun 29, 2020 at 3:12 | history | edited | AnalogKid | CC BY-SA 4.0 |
added 2159 characters in body
|
Jun 29, 2020 at 0:43 | comment | added | Richard | Thank you.. I've tested this in LTSpice and it's perfect. I confess to not understanding quite how it works mind you. | |
Jun 29, 2020 at 0:42 | vote | accept | Richard | ||
Jun 28, 2020 at 20:44 | comment | added | Richard | that sounds like a solution... I'll give it a shot. | |
Jun 28, 2020 at 20:13 | history | edited | AnalogKid | CC BY-SA 4.0 |
added 332 characters in body
|
Jun 28, 2020 at 20:07 | history | edited | AnalogKid | CC BY-SA 4.0 |
added 332 characters in body
|
Jun 28, 2020 at 18:06 | history | answered | AnalogKid | CC BY-SA 4.0 |