Timeline for Make audio signal go only one direction
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| S Jun 30, 2020 at 14:13 | history | mod moved comments to chat | |||
| S Jun 30, 2020 at 14:13 | comment | added | clabacchio | Comments are not for extended discussion; this conversation has been moved to chat. | |
| Jun 29, 2020 at 11:00 | history | edited | Arrrow | CC BY-SA 4.0 |
edited body
|
| Jun 29, 2020 at 10:22 | history | edited | Arrrow | CC BY-SA 4.0 |
deleted 4 characters in body
|
| Jun 29, 2020 at 10:17 | comment | added | Arrrow | I have added the schematic and pcb layout. Note that the PCB is single sided because I etch the PCB's myself, and my materials do not allow traces to be much thinner. | |
| Jun 29, 2020 at 10:16 | history | edited | Arrrow | CC BY-SA 4.0 |
added images
|
| Jun 28, 2020 at 22:29 | comment | added | Arrrow | The problem is that the decoupling/ground plane is done in the radio itself, my pcb ties the data lines to an arduino, as well as vcc and ground. It ties the L, R and common wires directly to a trs jack, which is then connected to my phone. | |
| Jun 28, 2020 at 22:20 | comment | added | winny | XY problem! Solve the noise issue instead of inventing a (complicated) way around it. Sounds like lack of ground plane/poor decoupling. | |
| Jun 28, 2020 at 22:15 | history | asked | Arrrow | CC BY-SA 4.0 |