Skip to main content
added 29 characters in body
Source Link

Is it allowable to connect some (a group) of three phase fan motors with Dahlander wiring inside in parallel? The whole group will be used for low and high speed according to request. Equal load on each motor. Maybe someone has such an experience? Common fuses for the whole group, not individual (know it is bad). The same power all of them.

Is it allowable to connect some (a group) of three phase fan motors with Dahlander wiring inside in parallel? The whole group will be used for low and high speed according to request. Equal load on each motor. Maybe someone has such an experience? Common fuses for the whole group, not individual (know it is bad).

Is it allowable to connect some (a group) of three phase fan motors with Dahlander wiring inside in parallel? The whole group will be used for low and high speed according to request. Equal load on each motor. Maybe someone has such an experience? Common fuses for the whole group, not individual (know it is bad). The same power all of them.

English
Source Link
winny
  • 16.8k
  • 6
  • 50
  • 71

3 ph Three phase motors in parallel - possible?

Is it allowable to connect some (a group) of 3phthree phase fan motors with Dahlander wiring inside in parallel  ?The The whole group will be used for low and high speed according to request  .Equal Equal load on each motor  .Maybe Maybe someone has such an experience  ? Common fuses for the whole group  , not individual  (know it is bad).

3 ph motors in parallel - possible?

Is it allowable to connect some (a group) of 3ph fan motors with Dahlander wiring inside in parallel  ?The whole group will be used for low and high speed according to request  .Equal load on each motor  .Maybe someone has such an experience  ? Common fuses for the whole group  , not individual(know it is bad)

Three phase motors in parallel - possible?

Is it allowable to connect some (a group) of three phase fan motors with Dahlander wiring inside in parallel? The whole group will be used for low and high speed according to request. Equal load on each motor. Maybe someone has such an experience? Common fuses for the whole group, not individual  (know it is bad).

Source Link

3 ph motors in parallel - possible?

Is it allowable to connect some (a group) of 3ph fan motors with Dahlander wiring inside in parallel ?The whole group will be used for low and high speed according to request .Equal load on each motor .Maybe someone has such an experience ? Common fuses for the whole group , not individual(know it is bad)