Skip to main content
Converted Amazon affiliate link to plain link.
Source Link
SamGibson
  • 18.3k
  • 5
  • 41
  • 63

I must power a Wemos D1 mini at 5V (more on that below) (along with 4 LEDs and a DC motor) with a single cell AA battery. I have tried 2 boost converters (Vin 0.9V-5V) and none worked.

I need 5V for 2 of the LEDs, which are in series and 5V is perfect for them.

The motor will be driven with the 3.3V pin on Wemos D1 mini.

All the boost converters I tried deliver 5V unconnected. However, the moment I connect them to D1 mini, voltage drops around 1.5V. I tried with a power supply at 1.5V, same result.

I wonder, what I am missing. The specification says 600mA output current. I also tried to put a 100μF capacitor either to input or output side for sudden current draw. Supplying >3V worked fine. Dropping from 3V to 1.5V worked for a short while and then the output voltage dropped to ~1.5V. D1 mini draws ~70mA 5V. I

I wonder if I am missing something? Here

Here are the converters I have tried:

https://www.amazon.de/dp/B07PZ8QLB2/ref=asc_df_B07PZ8QLB21613404800000/?tag=ilovetec-21&creative=22662&creativeASIN=B07PZ8QLB2&linkCode=df0https://www.amazon.de/dp/B07PZ8QLB2

https://www.amazon.de/gp/product/B07SSXVHP8/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1https://www.amazon.de/dp/B07SSXVHP8

EDIT: as a test I tried with MT3608, which requires >2V. I supplied it with 3V and got 5V out. It worked just fine. I guess all these cheap undocumented boost converters are bad.

I must power a Wemos D1 mini at 5V (more on that below) (along with 4 LEDs and a DC motor) with a single cell AA battery. I have tried 2 boost converters (Vin 0.9V-5V) and none worked.

I need 5V for 2 of the LEDs, which are in series and 5V is perfect for them.

The motor will be driven with the 3.3V pin on Wemos D1 mini.

All the boost converters I tried deliver 5V unconnected. However, the moment I connect them to D1 mini, voltage drops around 1.5V. I tried with a power supply at 1.5V, same result.

I wonder, what I am missing. The specification says 600mA output current. I also tried to put a 100μF capacitor either to input or output side for sudden current draw. Supplying >3V worked fine. Dropping from 3V to 1.5V worked for a short while and then the output voltage dropped to ~1.5V. D1 mini draws ~70mA 5V. I wonder if I am missing something? Here are the converters I have tried:

https://www.amazon.de/dp/B07PZ8QLB2/ref=asc_df_B07PZ8QLB21613404800000/?tag=ilovetec-21&creative=22662&creativeASIN=B07PZ8QLB2&linkCode=df0

https://www.amazon.de/gp/product/B07SSXVHP8/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

EDIT: as a test I tried with MT3608, which requires >2V. I supplied it with 3V and got 5V out. It worked just fine. I guess all these cheap undocumented boost converters are bad.

I must power a Wemos D1 mini at 5V (more on that below) (along with 4 LEDs and a DC motor) with a single cell AA battery. I have tried 2 boost converters (Vin 0.9V-5V) and none worked.

I need 5V for 2 of the LEDs, which are in series and 5V is perfect for them.

The motor will be driven with the 3.3V pin on Wemos D1 mini.

All the boost converters I tried deliver 5V unconnected. However, the moment I connect them to D1 mini, voltage drops around 1.5V. I tried with a power supply at 1.5V, same result.

I wonder, what I am missing. The specification says 600mA output current. I also tried to put a 100μF capacitor either to input or output side for sudden current draw. Supplying >3V worked fine. Dropping from 3V to 1.5V worked for a short while and then the output voltage dropped to ~1.5V. D1 mini draws ~70mA 5V.

I wonder if I am missing something?

Here are the converters I have tried:

https://www.amazon.de/dp/B07PZ8QLB2

https://www.amazon.de/dp/B07SSXVHP8

EDIT: as a test I tried with MT3608, which requires >2V. I supplied it with 3V and got 5V out. It worked just fine. I guess all these cheap undocumented boost converters are bad.

New test with alternative boost converter.
Source Link

I must power a Wemos D1 mini at 5V (more on that below) (along with 4 LEDs and a DC motor) with a single cell AA battery. I have tried 2 boost converters (Vin 0.9V-5V) and none worked.

I need 5V for 2 of the LEDs, which are in series and 5V is perfect for them.

The motor will be driven with the 3.3V pin on Wemos D1 mini.

All the boost converters I tried deliver 5V unconnected. However, the moment I connect them to D1 mini, voltage drops around 1.5V. I tried with a power supply at 1.5V, same result.

I wonder, what I am missing. The specification says 600mA output current. I also tried to put a 100μF capacitor either to input or output side for sudden current draw. Supplying >3V worked fine. Dropping from 3V to 1.5V worked for a short while and then the output voltage dropped to ~1.5V. D1 mini draws ~70mA 5V. I wonder if I am missing something? Here are the converters I have tried:

https://www.amazon.de/dp/B07PZ8QLB2/ref=asc_df_B07PZ8QLB21613404800000/?tag=ilovetec-21&creative=22662&creativeASIN=B07PZ8QLB2&linkCode=df0

https://www.amazon.de/gp/product/B07SSXVHP8/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

EDIT: as a test I tried with MT3608, which requires >2V. I supplied it with 3V and got 5V out. It worked just fine. I guess all these cheap undocumented boost converters are bad.

I must power a Wemos D1 mini at 5V (more on that below) (along with 4 LEDs and a DC motor) with a single cell AA battery. I have tried 2 boost converters (Vin 0.9V-5V) and none worked.

I need 5V for 2 of the LEDs, which are in series and 5V is perfect for them.

The motor will be driven with the 3.3V pin on Wemos D1 mini.

All the boost converters I tried deliver 5V unconnected. However, the moment I connect them to D1 mini, voltage drops around 1.5V. I tried with a power supply at 1.5V, same result.

I wonder, what I am missing. The specification says 600mA output current. I also tried to put a 100μF capacitor either to input or output side for sudden current draw. Supplying >3V worked fine. Dropping from 3V to 1.5V worked for a short while and then the output voltage dropped to ~1.5V. D1 mini draws ~70mA 5V. I wonder if I am missing something? Here are the converters I have tried:

https://www.amazon.de/dp/B07PZ8QLB2/ref=asc_df_B07PZ8QLB21613404800000/?tag=ilovetec-21&creative=22662&creativeASIN=B07PZ8QLB2&linkCode=df0

https://www.amazon.de/gp/product/B07SSXVHP8/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

I must power a Wemos D1 mini at 5V (more on that below) (along with 4 LEDs and a DC motor) with a single cell AA battery. I have tried 2 boost converters (Vin 0.9V-5V) and none worked.

I need 5V for 2 of the LEDs, which are in series and 5V is perfect for them.

The motor will be driven with the 3.3V pin on Wemos D1 mini.

All the boost converters I tried deliver 5V unconnected. However, the moment I connect them to D1 mini, voltage drops around 1.5V. I tried with a power supply at 1.5V, same result.

I wonder, what I am missing. The specification says 600mA output current. I also tried to put a 100μF capacitor either to input or output side for sudden current draw. Supplying >3V worked fine. Dropping from 3V to 1.5V worked for a short while and then the output voltage dropped to ~1.5V. D1 mini draws ~70mA 5V. I wonder if I am missing something? Here are the converters I have tried:

https://www.amazon.de/dp/B07PZ8QLB2/ref=asc_df_B07PZ8QLB21613404800000/?tag=ilovetec-21&creative=22662&creativeASIN=B07PZ8QLB2&linkCode=df0

https://www.amazon.de/gp/product/B07SSXVHP8/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

EDIT: as a test I tried with MT3608, which requires >2V. I supplied it with 3V and got 5V out. It worked just fine. I guess all these cheap undocumented boost converters are bad.

Source Link

Boost converter single cell AA battery not delivering enough voltage when connected to Wemos D1 mini

I must power a Wemos D1 mini at 5V (more on that below) (along with 4 LEDs and a DC motor) with a single cell AA battery. I have tried 2 boost converters (Vin 0.9V-5V) and none worked.

I need 5V for 2 of the LEDs, which are in series and 5V is perfect for them.

The motor will be driven with the 3.3V pin on Wemos D1 mini.

All the boost converters I tried deliver 5V unconnected. However, the moment I connect them to D1 mini, voltage drops around 1.5V. I tried with a power supply at 1.5V, same result.

I wonder, what I am missing. The specification says 600mA output current. I also tried to put a 100μF capacitor either to input or output side for sudden current draw. Supplying >3V worked fine. Dropping from 3V to 1.5V worked for a short while and then the output voltage dropped to ~1.5V. D1 mini draws ~70mA 5V. I wonder if I am missing something? Here are the converters I have tried:

https://www.amazon.de/dp/B07PZ8QLB2/ref=asc_df_B07PZ8QLB21613404800000/?tag=ilovetec-21&creative=22662&creativeASIN=B07PZ8QLB2&linkCode=df0

https://www.amazon.de/gp/product/B07SSXVHP8/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1