I have just started with electronics and I made the very simple circuit on falstad, but there is an issue with the resistance... I have a 5-volt power supply connected to an led with a resistance of 0.088ohms connected to a 220-ohm resistor according to my calculations the current flowing through the wire should be 22.718 milliamperes. I am getting the correct value when value I connect the 220-ohm resistor to a 0.088-ohm resistor but I am not getting it when I connect the 220-ohm resistor to the led. Here are the screenshots-

Thank You!

I have just started with electronics. I made the very simple circuit on Falstad, but there is an issue with the resistance.

I have a 5 volt power supply connected to an LED with a resistance of 0.088ohms connected to a 220-ohm resistor.

According to my calculations, the current flowing through the wire should be 22.718 milliamperes. 

I am getting the correct value when I connect the 220-ohm resistor to a 0.088-ohm resistor but I am not getting it when I connect the 220-ohm resistor to the LED.

Here are the screenshots:

LED with resistor

• Current = 14.54mA
• Voltage=5V
• Total resistance = 220.088ohms

Resistor circuit:

• Current = 56.718A
• Voltage = 5V
• Resistance = 0.088ohms

Thank You!