Timeline for Bridge rectifier and phantom voltage
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jun 16, 2021 at 16:33 | comment | added | Ama | I have no idea what's inside the LED driver or the LED rack, I just represented the elements I am sure off. There are no additional cables at play, I disconnected the DC cable from the LED driver terminal, and there is now only one cable making any physical contact between the power of my house and this rack of LEDs. The physical contact goes AC cable x1 - LED Driver - DC cable x1 | |
| Jun 15, 2021 at 13:53 | comment | added | Cristobol Polychronopolis | I'm not seeing any filtering or constant current circuitry, or even limiting resistors, in your schematic above. However, it seems unlikely that inductive coupling to an open loop could power a 1K load for 8 hours. I suspect a connection not represented in the above schematics. | |
| Jun 15, 2021 at 8:58 | comment | added | Ama | Thanks! I will send some schematics later this week. I did try the 1K load resistor and it does not work. LEDs stay "on" for an unlimited time (well, at least 8 hours until sundown). | |
| Jun 14, 2021 at 19:10 | history | answered | Cristobol Polychronopolis | CC BY-SA 4.0 |