Timeline for Track not locking to same net pad in Altium
Current License: CC BY-SA 4.0
5 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Oct 14, 2021 at 15:58 | history | edited | JYelton | CC BY-SA 4.0 |
Added spacing, formatted key shortcut, removed unnecessary thanks (show thanks by up-voting and accepting answers)
|
Oct 14, 2021 at 15:56 | answer | added | JYelton | timeline score: 2 | |
Oct 14, 2021 at 2:01 | comment | added | Peter Bennett | If I recall correctly, you MUST route to the center of the pad, otherwise DRC will think the track is not connected to the pad. If you want a track to appear to come from the bottom of the pad, you need to place a short bit of track within the pad, then place a vertex as needed to have the track leave the pad at the desired place. | |
Oct 14, 2021 at 1:52 | comment | added | Spehro 'speff' Pefhany | If you end this trace without connecting it, and double click the trace for the net, what does it say? | |
Oct 14, 2021 at 1:30 | history | asked | JCSB | CC BY-SA 4.0 |