Timeline for Turning 24V battery to 6V battery help
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 7, 2023 at 0:59 | vote | accept | nikola | ||
| Jan 11, 2022 at 20:18 | vote | accept | nikola | ||
| Jul 7, 2023 at 0:59 | |||||
| Jan 9, 2022 at 9:40 | comment | added | fraxinus | Is your DeWalt battery Li-Ion or NiCd ? Both types exist and the NiCd variety will be rather easy to convert (destructively) into 6V pack (or even four 6V packs). | |
| Jan 9, 2022 at 8:46 | answer | added | No Man | timeline score: 1 | |
| Jan 9, 2022 at 6:25 | comment | added | Kyle B | Don't mess with the DeWalt battery. Too much overhead for no return. As @Hearth suggests, replace it with a 6V NiMH pack. You can get them (and chargers) on Amazon for a few dollars. Lots of different sizes available. 150mA is pretty low for an RC car as well, you sure about that? Must be a very small car. | |
| Jan 9, 2022 at 5:48 | comment | added | Hearth | It would be far easier to replace it with a similar modern battery; NiCd is no longer easily available, but NiMH has very similar characteristics and is very easy to get. | |
| Jan 9, 2022 at 5:42 | comment | added | D.A.S. | It might be easier to disassemble the pack into a low voltage array than use a DCDC regulator. But both options are available. | |
| S Jan 9, 2022 at 5:39 | review | First questions | |||
| Jan 9, 2022 at 7:58 | |||||
| S Jan 9, 2022 at 5:39 | history | asked | nikola | CC BY-SA 4.0 |