Timeline for Upload ASM code on Intel 8086 chip
Current License: CC BY-SA 4.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 12, 2022 at 5:29 | vote | accept | Mora | ||
| Nov 12, 2022 at 5:28 | vote | accept | Mora | ||
| Nov 12, 2022 at 5:28 | |||||
| Nov 11, 2022 at 19:36 | comment | added | jonk | @supercat Yes. I personally wire-wrapped a lot and limited myself to about 4 MHz for anything I did in that way. And I never had any troubles. Beyond that I'd worry, though. | |
| Nov 11, 2022 at 17:30 | comment | added | Marcus Müller | @supercat no doubt about that! The computer Ben Eater built also works. It's just, as said, probably not good for your sanity :) | |
| Nov 11, 2022 at 17:27 | comment | added | supercat | @MarcusMüller: Back in the day, it wasn't uncommon for people to build 8086 or even 68000-based systems on breadboards. Clock speeds would have been rather limited by modern standards, but the things did actually work, somehow. | |
| Nov 11, 2022 at 12:04 | comment | added | Marcus Müller | @RJR uff, that nest of (very tidy!) cabling suggests: really not something you want to build on breadboard if you value your sanity. Both for "oh, this is sooo many cables" and "oh, this is sooo many cable-board connection which individually can be a bit flimsy" reasons. The videos are very cool and instructional! I like it. | |
| Nov 11, 2022 at 11:53 | comment | added | RJR | Great explanation. If you want to see what's needed, have a look here: eater.net/6502 - Ben's using a 6502, but the requirements are very similar. | |
| Nov 11, 2022 at 9:17 | history | answered | Marcus Müller | CC BY-SA 4.0 |