Timeline for Flashing STM32 via SPI from STMCubeIDE
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 13, 2022 at 21:01 | comment | added | Justme | Yes but it is not your program that runs, it is the bootloader that runs when flashing over serial. You must use the SWD pins for SWD (sorry no full JTAG, only SWD). | |
| Nov 13, 2022 at 20:45 | comment | added | Jack Frye | Looking through the technical reference manual, I see something saying you can boot from USART on PA9/PA10. When I go to setup USART in CubeIDE, it wants the USART on PA2/PA3, which has me a bit confused. I don't see anything about JTAG. Can you use IO for JTAG. Don't see any way to set that up in Cube or any indication of what pins those would be in the default bootloader | |
| Nov 13, 2022 at 19:54 | history | answered | Justme | CC BY-SA 4.0 |