Timeline for Receiver Automatic Gain Control purpose
Current License: CC BY-SA 4.0
6 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Dec 12, 2022 at 7:29 | comment | added | Lundin | Depending on what kind of radio design it is, the AGC can be placed at different locations, as I found out here. Either on the LNA or on the IF amp. I guess that the difference could be what kind of signal you are expecting, analog or digital. | |
Dec 10, 2022 at 13:46 | answer | added | user16324 | timeline score: 0 | |
Dec 10, 2022 at 3:17 | answer | added | glen_geek | timeline score: 1 | |
Dec 10, 2022 at 0:00 | answer | added | Barry | timeline score: 1 | |
Dec 9, 2022 at 22:56 | comment | added | Designalog | Sounds to me that if a receiver with an AGC responds to an interfere, then it's a poorly designed system. For instance, an AM Radio Receiver for cars needs hum filtering. The AGC loop will react on this, but there must be another loop with a hum sensing mechanism that makes the amplifier suppress that signal even further,ñ. After this happens, the AGC loop should behave normally. | |
Dec 9, 2022 at 22:40 | history | asked | cesar | CC BY-SA 4.0 |