Timeline for How to automate passive powering?
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 31, 2023 at 19:57 | comment | added | Sandro | For max supply, it all depends on the voltages OP wants. If a cut of voltage of for example 2.5V is fine, then we can increase the supply voltage to maybe 2.3V. One might also replace the mosfet by a bipolar transistor + resistor, but I don't like wasting energy on low power applications. | |
| Mar 31, 2023 at 19:55 | comment | added | Sandro | good point for the short in the schematics, I corrected it. For the mosfet, I mentionned that to get it working at 1.8V, one needs to carfully chose the mosfet. A random N-MOS will probably not do the job. But there are still 600 references with Vth<1.5V in stock at digikey (about 10%). | |
| Mar 31, 2023 at 19:51 | history | edited | Sandro | CC BY-SA 4.0 |
correcting short circuit on schematics
|
| Mar 31, 2023 at 19:47 | comment | added | tobalt | Comp has its inputs shorted and its max supply of 1.8 V is too low to enable most MOSFETs. | |
| Mar 31, 2023 at 19:27 | history | answered | Sandro | CC BY-SA 4.0 |