Skip to main content
Electrical Engineering

Return to Question

Tweeted twitter.com/StackElectronix/status/871017087862493185
English improvement
Source Link
edit approved May 16, 2017 at 9:52
Right leg
edit approved May 16, 2017 at 9:52
Right leg
  • 103
  • 4

Its a bit weird whats itsWhat is happening with the bluetooth module is a bit weird. Aparently itIt apparently works perfectly, it gets recognized btby my desktop computer and my laptop, but never gets listed on my mobile phone.

I've configured it in many ways, and itsit's always the same. Gets: it gets listed everywhere, but nonot in the mobile phone.

And yesI know for sure that the mobile phone works, because iI can connect it with other pcscomputers, and other devices getsget listed there too.

My configuration steps are:

AT
AT+ORGL
AT+RESET
AT+NAME=TEST
AT+ROLE=0
AT+POLAR=1,0
AT+RESET
AT+INIT
AT+INQ

I set the original from fabric just in case, and reset the device. Then configure it to set the name, slave role, invert the status pin so it goes low when is paired, and reset again to start with the new config.

Then I init the module and start inquiring.

Any idea whatWhat could be happening? I'mAm I missing something?

Its a bit weird whats its happening with the bluetooth module. Aparently it works perfectly, it gets recognized bt my desktop computer and my laptop, but never gets listed on my mobile phone.

I've configured it in many ways, and its always the same. Gets listed everywhere but no in the mobile phone.

And yes the mobile phone works because i can connect it with other pcs and other devices gets listed there too.

My configuration steps are:

AT
AT+ORGL
AT+RESET
AT+NAME=TEST
AT+ROLE=0
AT+POLAR=1,0
AT+RESET
AT+INIT
AT+INQ

I set the original from fabric just in case and reset the device. Then configure it to set the name, slave role, invert the status pin so it goes low when is paired, and reset again to start with the new config.

Then I init the module and start inquiring.

Any idea what could be happening? I'm missing something?

What is happening with the bluetooth module is a bit weird. It apparently works perfectly, it gets recognized by my desktop computer and my laptop, but never gets listed on my mobile phone.

I've configured it in many ways, and it's always the same: it gets listed everywhere, but not in the mobile phone.

I know for sure that the mobile phone works, because I can connect it with other computers, and other devices get listed there too.

My configuration steps are:

AT
AT+ORGL
AT+RESET
AT+NAME=TEST
AT+ROLE=0
AT+POLAR=1,0
AT+RESET
AT+INIT
AT+INQ

I set the original from fabric just in case, and reset the device. Then configure it to set the name, slave role, invert the status pin so it goes low when is paired, and reset again to start with the new config.

Then I init the module and start inquiring.

What could be happening? Am I missing something?

edited title
Link
Sein Oxygen
Sein Oxygen
  • 489
  • 2
  • 4
  • 14

HC-05 Bluetooth module not recorgnizedrecognized by mobile phone

Source Link
Sein Oxygen
Sein Oxygen
  • 489
  • 2
  • 4
  • 14

HC-05 Bluetooth module not recorgnized

Its a bit weird whats its happening with the bluetooth module. Aparently it works perfectly, it gets recognized bt my desktop computer and my laptop, but never gets listed on my mobile phone.

I've configured it in many ways, and its always the same. Gets listed everywhere but no in the mobile phone.

And yes the mobile phone works because i can connect it with other pcs and other devices gets listed there too.

My configuration steps are:

AT
AT+ORGL
AT+RESET
AT+NAME=TEST
AT+ROLE=0
AT+POLAR=1,0
AT+RESET
AT+INIT
AT+INQ

I set the original from fabric just in case and reset the device. Then configure it to set the name, slave role, invert the status pin so it goes low when is paired, and reset again to start with the new config.

Then I init the module and start inquiring.

Any idea what could be happening? I'm missing something?