Skip to main content
13 events
when toggle format what by license comment
Aug 21, 2023 at 10:02 history closed Tim Williams
Andy aka analog
Duplicate of Generating a delayed pulse with one 555 timer upon powering up the circuit
Aug 21, 2023 at 9:47 review Close votes
Aug 21, 2023 at 10:07
Aug 21, 2023 at 9:44 history edited winny CC BY-SA 4.0
added 4 characters in body
Aug 21, 2023 at 9:41 answer added MikeP timeline score: 0
Aug 21, 2023 at 9:27 comment added Lundin You can use a 74HC binary counter which toggles some BJT or shuts off its own enable pin once reaching a certain number. Not sure why you would want to do this with an analog circuit rather than a digital one?
Aug 21, 2023 at 9:24 comment added Ufuk Özgür @ChengxianZhang Yes it should be work like that. I'm looking for the datasheets of the specified IC's right now. Is there any analog RC circuit alternative for that IC's? Thank you.
Aug 21, 2023 at 9:18 comment added Ufuk Özgür @Andyaka T1 and T2 can be 2 or 3 seconds and the power supply rise time is not a problem with that range of time. And any voltage above 2.5V can be considered as threshold voltage.
Aug 21, 2023 at 9:13 comment added Ufuk Özgür @Finbarr It's a requirement for this project. And i'm curious if it can be achieved with a analog circuit.
Aug 21, 2023 at 9:07 comment converted from answer Chengxian Zhang Is it a power supply supervisor? Like CAT803 OR TPS3808?
Aug 21, 2023 at 8:58 comment added Andy aka What if the 5 volts comes up slowly (as will happen with most power supplies)? What is the threshold at which the added circuit should begin to start its timer? You need to state T1 and T2 and allow a tolerance band.
Aug 21, 2023 at 8:56 comment added Finbarr Why can't you use an MCU?
S Aug 21, 2023 at 8:42 review First questions
Aug 21, 2023 at 9:33
S Aug 21, 2023 at 8:42 history asked Ufuk Özgür CC BY-SA 4.0