Timeline for Programming an NXP - LPC1313FBD48
Current License: CC BY-SA 3.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 5, 2013 at 17:42 | answer | added | Wouter van Ooijen | timeline score: 2 | |
| May 5, 2013 at 17:37 | comment | added | Chris Stratton | The choice of USB serial converter would depend on the surrounding circuitry on the board rather than on the bare MCU. If the board has RS232 level shifters, you'll want a consumer-type converter with it's own RS232 level shifters and typically a DE-9 connector. If the board doesn't have level shifters, it will probably want a logic level cable with a rectangular header or breakout to loose wires, however there's still the question of which precise logic voltage is needed. As a guess probably the 3.3v, as most MCU's still have 3.3v UART pins, but high performance chips may need lower. | |
| May 5, 2013 at 17:34 | comment | added | Coder404 | @LeonHeller Sorry, but I don't really understand your comment | |
| May 5, 2013 at 17:34 | comment | added | Leon Heller | You need to design a suitable PCB for your application, and get one made. | |
| May 5, 2013 at 17:32 | history | edited | Coder404 | CC BY-SA 3.0 |
Added the part number
|
| May 5, 2013 at 17:31 | comment | added | Coder404 | @ChrisStratton ok. I'll do that | |
| May 5, 2013 at 17:30 | comment | added | Chris Stratton | Please put the part number of the MCU in the question title and body; it's absurdly broad without that, and asking people to follow a link to a vendor catalog is impolite. Also give the products you reference names rather than just links. | |
| May 5, 2013 at 17:18 | history | asked | Coder404 | CC BY-SA 3.0 |