Timeline for CANbus wiring architecture
Current License: CC BY-SA 4.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 4 at 14:47 | comment | added | Lundin | As for connectors, it does of course depend on your environment, budget, IP requirements and so on. There's a whole lot of different connector pin-outs specified by the CANopen standard, everything from RJ45 to M12. | |
| Mar 4 at 14:46 | comment | added | Lundin | Generally, in my personal experience, you will get away with very long stubs on CAN if you just keep the baudrates down. 125kbps or 250kbps are the most common baudrates and they are quite lenient to stubs. For 1Mbps it gets pickier overall though. Is there an actual real-time reason you want to use 1Mbps? How did you come up with that baudrate? | |
| Mar 4 at 13:57 | comment | added | Luis Carlos | C1/C2 are like a gateway, they have 2 transceivers/can controllers. | |
| Mar 4 at 12:58 | comment | added | Jeroen3 | Are all blue lines intended to be the same CAN bus network or is C1/C2 a gateway? | |
| Mar 4 at 12:52 | answer | added | RoyC | timeline score: 1 | |
| Mar 4 at 12:04 | answer | added | Justme | timeline score: 1 | |
| Mar 4 at 11:46 | history | edited | Luis Carlos | CC BY-SA 4.0 |
added 21 characters in body
|
| Mar 4 at 11:41 | history | asked | Luis Carlos | CC BY-SA 4.0 |