Skip to main content
Electrical Engineering

Return to Question

added 22 characters in body; edited title
Source Link
ocrdu
ocrdu
  • 9.3k
  • 23
  • 32
  • 42

Water level monitoring: simplest way

I like to develop a water level monitoring for my Cisterncistern tank. Monitor Empty: empty level, low level, mid level, high level. 

One of my booster pumppumps broke because it is runningruns even when there is no water in the cistern tank. CisternThe cistern tank is filled via a float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring:

enter image description here

enter image description here

Is there a risk of 220v ac220 V AC flowing in the water, and how todo I avoid itthat? I don't know any micro controllermicrocontrollers or programming of it, so I choicechoose hard wiring and an indicator light.

SecondA second option is to use float lessfloatless relay like the ANLY a61FA61F-G3.

enter image description here

But how to have an indicator light in lowerat the low limit (E4) and high limit (E1) separately. Because the? The indicator light option is available only for lowerlow (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way.? Example i: I want my pump to stop working anything below E4 and Startstart pumping when it reachreaches E4. isIs that possible with the float lessfloatless relay?

Note: note it is not about the monitoring of the filling by the cistern pump, but preventing my booster pump from working if there is no water in the cistern tank.

Water level monitoring simplest way

I like to develop a water level monitoring for my Cistern tank. Monitor Empty level, low level, mid level, high level. One of my booster pump broke because it is running even there is no water in the cistern tank. Cistern tank is filled via float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring

enter image description here

enter image description here

Is there a risk of 220v ac flowing in the water how to avoid it? I don't know any micro controller or programming of it so I choice hard wiring and indicator light.

Second option is to use float less relay ANLY a61F-G3

enter image description here

But how to have indicator light in lower limit (E4) and high limit (E1) separately. Because the indicator light option is available only for lower (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way. Example i want my pump to stop working anything below E4 and Start pumping when it reach E4. is that possible with the float less relay?

Note: note it not monitoring of filling the cistern pump, but preventing my booster pump from working if there is no water in the cistern tank

Water level monitoring: simplest way

I like to develop a water level monitoring for my cistern tank: empty level, low level, mid level, high level. 

One of my booster pumps broke because it runs even when there is no water in the cistern tank. The cistern tank is filled via a float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring:

enter image description here

enter image description here

Is there a risk of 220 V AC flowing in the water, and how do I avoid that? I don't know microcontrollers or programming, so I choose hard wiring and an indicator light.

A second option is to use floatless relay like the ANLY A61F-G3.

enter image description here

But how to have an indicator light at the low limit (E4) and high limit (E1) separately? The indicator light option is available only for low (E3) and high (E2). How to have water level monitoring regardless if you have a motor or not the simplest way? Example: I want my pump to stop working anything below E4 and start pumping when it reaches E4. Is that possible with the floatless relay?

Note: it is not about the monitoring of the filling by the cistern pump, but preventing my booster pump from working if there is no water in the cistern tank.

added 146 characters in body; edited title
Source Link
Carlo S
Carlo S
  • 31
  • 2

I like to develop a water level monitoring for my cisternCistern tank. Monitor emptyEmpty level, low level, mid level, high level. One of my booster pump broke because it is running even there is no water in the cistern tank. Cistern tank is filled via float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring.

enter image description here

enter image description here

Is there a risk of 220 V AV220v ac flowing in the water how to avoid it? I don't know any micro controller or programming of it so I choice hard wiring and indicator light.

Second option is to use float less relay ANLY a61F-G3

enter image description here

But how to have indicator light in lower limit (E4) and high limit (E1) separately. Because the indicator light option is available only for lower (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way. For example, IExample i want my pump to stop working anything below E4 and startStart pumping when it reach E4. Isis that possible with the float less relay?

Note: note it not monitoring of filling the cistern pump, but preventing my booster pump from working if there is no water in the cistern tank

I like to develop a water level monitoring for my cistern tank. Monitor empty level, low level, mid level, high level. One of my booster pump broke because it is running even there is no water in the cistern tank. Cistern tank is filled via float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring.

enter image description here

enter image description here

Is there a risk of 220 V AV flowing in the water how to avoid it? I don't know any micro controller or programming of it so I choice hard wiring and indicator light.

Second option is to use float less relay ANLY a61F-G3

enter image description here

But how to have indicator light in lower limit (E4) and high limit (E1) separately. Because the indicator light option is available only for lower (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way. For example, I want my pump to stop working anything below E4 and start pumping when it reach E4. Is that possible with the float less relay?

I like to develop a water level monitoring for my Cistern tank. Monitor Empty level, low level, mid level, high level. One of my booster pump broke because it is running even there is no water in the cistern tank. Cistern tank is filled via float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring

enter image description here

enter image description here

Is there a risk of 220v ac flowing in the water how to avoid it? I don't know any micro controller or programming of it so I choice hard wiring and indicator light.

Second option is to use float less relay ANLY a61F-G3

enter image description here

But how to have indicator light in lower limit (E4) and high limit (E1) separately. Because the indicator light option is available only for lower (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way. Example i want my pump to stop working anything below E4 and Start pumping when it reach E4. is that possible with the float less relay?

Note: note it not monitoring of filling the cistern pump, but preventing my booster pump from working if there is no water in the cistern tank

added 7 characters in body; edited title
Source Link
winny
winny
  • 16.8k
  • 6
  • 50
  • 71

water Water level monitoring simplest way

I like to develop a water level monitoring for my Cisterncistern tank. Monitor Emptyempty level, low level, mid level, high level. One of my booster pump broke because it is running even there is no water in the cistern tank. Cistern tank is filled via float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring.

enter image description here

enter image description here

Is there a risk of 220v ac220 V AV flowing in the water how to avoid it? I don't know any micro controller or programming of it so I choice hard wiring and indicator light.

Second option is to use float less relay ANLY a61F-G3

enter image description here

But how to have indicator light in lower limit (E4) and high limit (E1) separately. Because the indicator light option is available only for lower (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way. Example iFor example, I want my pump to stop working anything below E4 and Startstart pumping when it reach E4. isIs that possible with the float less relay?

water level monitoring simplest way

I like to develop a water level monitoring for my Cistern tank. Monitor Empty level, low level, mid level, high level. One of my booster pump broke because it is running even there is no water in the cistern tank. Cistern tank is filled via float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring

enter image description here

enter image description here

Is there a risk of 220v ac flowing in the water how to avoid it? I don't know any micro controller or programming of it so I choice hard wiring and indicator light.

Second option is to use float less relay ANLY a61F-G3

enter image description here

But how to have indicator light in lower limit (E4) and high limit (E1) separately. Because the indicator light option is available only for lower (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way. Example i want my pump to stop working anything below E4 and Start pumping when it reach E4. is that possible with the float less relay?

Water level monitoring simplest way

I like to develop a water level monitoring for my cistern tank. Monitor empty level, low level, mid level, high level. One of my booster pump broke because it is running even there is no water in the cistern tank. Cistern tank is filled via float valve from the elevated raw water.

One of my option is some previous answer related to water level monitoring.

enter image description here

enter image description here

Is there a risk of 220 V AV flowing in the water how to avoid it? I don't know any micro controller or programming of it so I choice hard wiring and indicator light.

Second option is to use float less relay ANLY a61F-G3

enter image description here

But how to have indicator light in lower limit (E4) and high limit (E1) separately. Because the indicator light option is available only for lower (E3) and high (E2). How to have a water level monitoring regardless if you have a motor or not the simplest way. For example, I want my pump to stop working anything below E4 and start pumping when it reach E4. Is that possible with the float less relay?

added 209 characters in body
Source Link
Carlo S
Carlo S
  • 31
  • 2
Source Link
Carlo S
Carlo S
  • 31
  • 2