Timeline for How to program an STM32 MCU on a custom PCB
Current License: CC BY-SA 4.0
10 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Sep 21 at 20:27 | comment | added | brhans | A genuine ST-LinkV2 is a one-off $25 development cost (not a BOM line-item). Knock-offs can be had for $10. Although recommendations are off-topic, for more professional use and many different MCUs, you can't go wrong with a Segger J-Link. | |
Sep 21 at 19:08 | history | bumped | CommunityBot | This question has answers that may be good or bad; the system has marked it active so that they can be reviewed. | |
Apr 2 at 8:22 | answer | added | Lundin | timeline score: 1 | |
Mar 31 at 10:19 | comment | added | kkrambo | The ST-Link can be external to your board and reused from board to board (and project to project). I don't understand why you would include it on your BOM. You should only need to add a Cortex debug connector to your BOM, for connecting the ST-Link to the board. In your USB-UART design, would you be putting the FTDI chip and a USB connector on your board? Doesn't that result in a larger BOM? | |
Mar 30 at 18:32 | comment | added | Cqllysto | As the firmware aspect of it is not very involved. There is little to no debugging that I foresee with this project. I guess I can buy the STlink, I am just trying to keep my BOM as small as I can | |
Mar 30 at 16:09 | comment | added | kkrambo | The ST-Link will save you a lot of time. Is your time really that cheap? | |
Mar 29 at 15:48 | history | edited | jsotola | CC BY-SA 4.0 |
corrected spelling
|
Mar 29 at 15:32 | comment | added | Justme | You never said which STM32 model. Depending on model, it might support flashing via USB directly. Also, a genuine ST-Link is only about 20 USD or 20 EUR. Because it allows you to debug over JTAG and SWD, it is well worth having one when developing the firmware. | |
S Mar 29 at 15:17 | review | First questions | |||
Mar 29 at 16:11 | |||||
S Mar 29 at 15:17 | history | asked | Cqllysto | CC BY-SA 4.0 |