Skip to main content
4 events
when toggle format what by license comment
Apr 1 at 20:06 comment added Open_Hamster3337 I would connect it in parallel with the load, with the fan being the load. It would be reverse biased relative to the 12VDC power supply. Physically I would put it close to the actual load rather than right at the power supply.
Apr 1 at 19:45 comment added Justme @Open_Hamster3337 But you never answered how you would even connect a flyback diode if it is directly connected to supplies.
Apr 1 at 19:11 comment added Open_Hamster3337 I'm not switching the fan during operation, but the fan is being turned on and off each day with the rest of the controller, so that's where my concern comes.
Apr 1 at 19:01 history answered Finbarr CC BY-SA 4.0