Timeline for Flashing STM32h562ZI (on NUCLEO-H563ZI board) using μVision5
Current License: CC BY-SA 4.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 25 at 10:45 | comment | added | kkrambo | When you download/start the program in the debugger, does the execution reach a breakpoint at main()? If so, then step through to see where the execution stops behaving as you expect. If not, then have you included into your project startup files for the run-time environment, such as startup_stm32h563xx.s and system_stm32h5xx.c? If so then set a breakpoint where the startup code calls SystemInit() and see if you can get to and step from there. | |
| Apr 24 at 13:30 | comment | added | George P. | I am aware I can and have done so, but the whole point is to have to use as little libraries as possible, and be able to configure it (if possible) almost entirely using the registers directly, thank you. | |
| Apr 24 at 12:47 | comment | added | Justme | Also I don't see how you "want to be able to configure the MCU with registers alone" depends on any IDE. Just code, compile and upload, using any tools you want. Nobody forces you to configure the MCU with the CubeMX GUI code generator. Create an empty non-cubeMX project. | |
| Apr 24 at 12:31 | history | edited | George P. | CC BY-SA 4.0 |
added 129 characters in body
|
| Apr 24 at 12:30 | comment | added | George P. | I am gonna edit the question | |
| Apr 24 at 12:23 | comment | added | Justme | You are programming the MCU through a debugger. Have you debugged what the problem is, what code is executed and what isn't? | |
| Apr 24 at 12:13 | history | edited | George P. | CC BY-SA 4.0 |
added 28 characters in body; edited title
|
| Apr 24 at 12:03 | history | asked | George P. | CC BY-SA 4.0 |