Skip to main content
Electrical Engineering

Return to Question

Tweeted twitter.com/#!/StackElectronix/status/394670369447350272
Capitalization
Source Link
JYelton
JYelton
  • 34.9k
  • 34
  • 147
  • 272

Can I useduse serial port and rfidRFID reader on arduino pro miniArduino Pro Mini?

I have arduino pro miniArduino Pro Mini, hcHC-06 bluetooth module, and mifair rc522 rfidMifare RC522 RFID reader. Bluetooth module connects to serial port, and rfidRFID connects to sdaSDA, sckSCK, mosiMOSI,miso MISO, ground, reset, and 3.3v3V pins. I want to know if there might be a conflict between rfidRFID reader and atmegaATmega serial port. The reader will be used for reading and wiring cards. Bluetooth is there for monitoring.

Can I used serial port and rfid reader on arduino pro mini?

I have arduino pro mini, hc-06 bluetooth module, and mifair rc522 rfid reader. Bluetooth module connects to serial port, and rfid connects to sda, sck, mosi,miso, ground, reset, and 3.3v pins. I want to know if there might be a conflict between rfid reader and atmega serial port. The reader will be used for reading and wiring cards. Bluetooth is there for monitoring.

Can I use serial port and RFID reader on Arduino Pro Mini?

I have Arduino Pro Mini, HC-06 bluetooth module, and Mifare RC522 RFID reader. Bluetooth module connects to serial port, and RFID connects to SDA, SCK, MOSI, MISO, ground, reset, and 3.3V pins. I want to know if there might be a conflict between RFID reader and ATmega serial port. The reader will be used for reading and wiring cards. Bluetooth is there for monitoring.

Source Link
jM2.me
jM2.me
  • 443
  • 2
  • 6
  • 17

Can I used serial port and rfid reader on arduino pro mini?

I have arduino pro mini, hc-06 bluetooth module, and mifair rc522 rfid reader. Bluetooth module connects to serial port, and rfid connects to sda, sck, mosi,miso, ground, reset, and 3.3v pins. I want to know if there might be a conflict between rfid reader and atmega serial port. The reader will be used for reading and wiring cards. Bluetooth is there for monitoring.