I want to create a custom PCB to which this fingerprint sensor will connect. The problem is that I cannot identify which connector it uses. The sellers on Amazon and other sites don't know about it.
Any help on how I can identify the name/footprint for the female connector which is compatible with this wire?
After checking your link, the bigger version of picture is available, so I paste it here in case of the link dying.
This connector can be found under "JST" name, you would need to find the pitch, as they are available in many sizes, like 2.5mm, 2mm, 1mm and probably many other. When you have your device in hand, just measure the distance between pins and this is your pitch size.
EDIT:
I just realised you asked about female part, so it goes as "JST PCB mount female connector", maybe you can add "right angle" to have pins parallel to the PCB plane.
