This isn't something that can be answered in a single post, by a single person. However, I hope this answer provides enough information and links to be helpful.
It is important how signals are transmitted over the Internet. Note however that due to noise and the immense number of users, the same signal needs to be encoded, decoded, retransmitted, etc so the time needed for processing is many orders of magnitude more that the actual electrical signal needs to travel.
Conductive cables:
The electrons themselves don't move that fast because they bounce around inside of the conducting cables. However electricity doesn't travel based on electrons bouncing one onto the other, rather one repelling the other through electromagnetic interaction:
Say you have 3 electrons in line (assume one dimensional space). Move the first a little bit. The distance of the first to the second gets a little smaller. The electrostatic force on them gets a little larger. According to Coulomb's Law it is: $$\|F\|=k_e\frac{q_1 q_2}{r^2}$$ where: \$\|F\|\$ is the magnitude of the force, \$k_e\$ is Coulomb's constant, \$q_1\$ and \$q_2\$ is the charge of each of the two particles and finally \$r^2\$ is the distance between them.
As the first particle moves towards the second, the electrostatic force increases almost instantly. This causes the second particle to move a little bit towards the third etc.
"Almost instantly" actually means "at the speed of light" (\$c=299,792,458Km/s\$).
There is an extreme number of electrons inside a conducting wire and the physics are a bit more complicated but the gist of it is a signal gets across a conductor "almost instantly" but slower than \$c\$. If you figure out why \$c\$ is the limit, you would be next in line for a Nobel prize...
Optical Fibre:
Optical fibre cables transmit signals by photons instead of electrons. Even in this case however, the photons don't travel in a straight line. However, the time needed for the photon to travel across the line is still very small compared to the processing time to encode and decode the signals, as well as packet retransmissions.
Wireless:
Finally, communication satellites as well as numerous types of wireless links are used to transmit signals, well, wireless using a great number of transmission protocols, modulations and frequencies. In this case, signals are transmitted using electromagnetic radiation. This a very complex subject and I can't possibly cover it all.
The Internet and Routing All these thing, along with numerous other technologies, are used together to form The Internet. All these communication channels need to be connected and information needs to travel across this vast network in a reliable way. Packet routing is another huge subject. Routing is the main reason a packet takes "so long" to reach it's destination compared to how fast electromagnetic waves travel. Routing is also necessary for all those users to coexist on the same network.