Problem: A piece of equipment (resistance around 100Ohm, operating power is around 1W ) needs pulsed square wave power supply.
- Voltage range: at least 0-60V.
- Frequency range: at least 0.5 - 4KHz.
- Duty cycle range: at least 5%-95%.
- Can accept trigger (4KHz).
- Can divide trigger (f/2, f/4, etc...).
- Adjustable trigger delay.
- Clean waveform.
I'm not aware of any equipment that fits all those requirement. Most function generator can only reach +/- 10V. Most bench power supply only supply DC in CV/CC mode.
Analogue/Digital I/O devices (Arduino, DAC, etc.) with faster clock can achieve all those except for the voltage requirement. Perhaps there are some sort of amplifier that can bring the voltage to 60V ? but DC-DC boost modules only works with DC input/output.
Solderless solution would be preferable.
Thanks in advance !