I have been in two separate design reviews where the SEPIC topology was rejected for an isolated < 40W application. These meetings were at 2 different companies and with different principal engineers that both stated that the SEPIC design did not meet the isolation requirement.
In the end the size constraints, mainly height pushed one of the designs away from a flyback, and the principal engineer okayed the design so long as a common mode choke was added to the output of the SEPIC in question.
Most of the Textbooks and Articles that I have read categorize the SEPIC as an isolated topology, thus adding to my confusion.
What I do know:
- "You won’t find a complete analysis of the Sepic converter anywhere in printed literature. What you will find are application notes with comments like, “the Sepic is not well-understood.” Despite the lack of documentation for the converter, engineers continue to use it when applicable" Analyzing the Sepic Converter-BASSO
- All of the reference designs on the TI website list the Capacitor isolated topologies as Non-Isolated! (PMP10070,PMP30373,PMP30373,)
- Energy/Isolation is handled by different means with a capacitor vs transformer. (High level only though, i.e. charge/discharge vs magnetic field transfer)
My Questions are as follows:
- Is a SEPIC,CUK, or ZETA converter truly an Isolated Converter?
- How is capacitive isolation compare to transformer isolation?
- How could the Common Mode Choke alleviate any isolation concerns?
Thank you all in advance!