I have an encoder, the circuit is in the image below:

The one that i m interested in is the PNP one, i want to use a 0-5V digital voltage, the datasheet says this

1. Applied voltage: 30 VDC max.
2. Source current: 35 mA max
3. Residual voltage: 0.4 V max. (at source current of 35 mA)

By my calculations with basic kirchhoff law i cannot obtain 5Volts because the 35mA max, the pulldown resistor should be very low, because the emitter resistor is very low, am i missing something, how can i dimensionate the correct resistor ?

This was the calculations that i made, what was wrong im very tired